Welcome to bObsweep's Support Community!

Mingle, ask questions, and share ideas with your bObsweep family around the world.

New to the community? Start here.

Cleaning Brushes - bObi Pet

After a long day at work, bObi may need some help maintaining her brushes. It is best to clean bObi's brushes weekly if you are using her regularly.

To remove bObi's main brushes, flip bObi over onto a flat surface. Grip the red latch on the side of bObi's brushes and lift the gate locking her brushes in place.

bobi robot vacuum maintenance brush cleaning guide main brushes

 Pull each brush (bObi's grey brush and rubber sweeper) to the side and out.

bobi robot vacuum maintenance brush cleaning guide remove main brushes

You may use scissors to cut long hair wrapped around the brushes.

bobi robot vacuum maintenance brush cleaning guide scissors hair

Make sure to thoroughly clean bObi’s brush compartment, and remove and clean the rubber brush holders at the ends of both brushes.

bobi robot vacuum maintenance brush cleaning guide rubber ends rubber holders

When done, reattach the brush holders on the ends of bObi's brushes. Line up the other ends with the indentations opposite the locking gate. You may have to turn bObi's brushes slightly and apply light pressure until they fit into place.

bobi robot vacuum maintenance brush cleaning guide main brushes brush compartment replacing main brushes

Lower the rubber ends and replace the locking gate. Push down until it locks.

bobi robot vacuum maintenance brush cleaning guide replacing main brushes

To clean bObi's side brush, use a Phillips head screwdriver to remove the screw holding her side brush in place.

bobi robot vacuum maintenance brush cleaning guide side brush cleaning side brush removing side brush

Remove any dust and hair from both bObi's side brush and the socket where it is held.

bobi robot vacuum maintenance brush cleaning guide side brush cleaning side brush replacing side brush

Reinstall bObi's side brush by screwing it in place.

Have more questions? Submit a request