Welcome to bObsweep's Support Community!

Mingle, ask questions, and share ideas with your bObsweep family around the world.

New to the community? Start here.

Scheduled Cleanings - Bob PetHair

You can give Bob a regular cleaning schedule so he automatically cleans on certain days of the week, even when you are not at home.

Before setting Bob’s cleaning schedule, you must set his current time and weekday. First, make sure Bob’s charging station is plugged into the wall and its lights are turned on. If the station is plugged but the lights are turned off, press the power button in the upper left corner.

Then, press the clock button on the right side of the display and the minutes digit will begin to flash.

Use the plus button to select the current minutes.

Press the clock button again and the hours digit will flash.

Use the plus button to select the current hour. Bob works on a 24-hour clock, so schedule accordingly.

Press the clock button one last time to change the current day of the week.

Use the plus button to scroll through each option until you have reached the desired weekday.

To save your settings, press the GO button to the left of the display.

Now you are ready to set Bob’s weekly cleaning schedule. Press the bell button to the right of the display and the minutes digit will flash.

Use the plus button to select the desired minute. 

Press the bell button once more and the hours digit will flash.

Use the plus button to select the desired hour.

Press the bell button again and you you will see the Sunday icon flash.

If you would like Bob to clean on the selected weekday, wait until it stops flashing to press the plus button and move on to the next weekday. 

If you would like to bypass a day on Bob’s cleaning schedule, press the plus button while the weekday icon is still flashing.

To save your settings, press the GO button to the left of the display.

If Bob's charging station is left unplugged for more than 8 hours, his cleaning schedule will reset.

Have more questions? Submit a request