Bob has three specialized movement patterns: Spiral Track, Waffle Track, and Wall Track. When one of these patterns is selected, Bob will not return to his charging station; instead, he will stop and wait for his next command.
To select Spiral Track or Waffle Track, press the MODE button twice and the word SPOT will light up on Bob’s screen.
Press PROGRAM to select either Spot 1 or Spot 2.
Then, press START to confirm your selection.
Spot 1: Spiral Track
Select Spot 1 for Spiral Track. In this mode, Bob will target a spill by spinning in gradually widening circles for 1 – 4 minutes.
You may also select Spiral Track by pressing the SPOT button on his remote.
Spot 2: Waffle Track
Spot 2 indicates Waffle Track. Bob will travel in a grid pattern across a small, soiled area for 1 – 4 minutes.
Wall Follow/Wall Track
In Wall Track mode, Bob travels along the edges of furniture and walls for approximately 10 minutes, using his side brush to sweep dust and debris into his dustbin. To activate Bob’s Wall Track mode, press the MODE button on his cover until WALL FOLLOW lights up at the top of his screen.
Press START, and Bob will search for the nearest vertical surface, then clean around the perimeter of your room.
You can also activate this cleaning mode by pressing the WALL/CORNER button on Bob’s remote.