After a long day at work, bObi may need some help maintaining her brushes. It is best to clean bObi's brushes weekly if you are using her regularly.
To remove bObi's main brushes, flip bObi over onto a flat surface. Grip the red latch on the side of bObi's brushes and lift the gate locking her brushes in place.
Pull each brush (bObi's Blö brush and rubber sweeper) to the side and out.
You may use scissors to cut long hair wrapped around the brushes.
Make sure to thoroughly clean bObi’s brush compartment, and remove and clean the rubber brush holders at the ends of both brushes.
When done, reattach the brush holders on the ends of bObi's brushes. Line up the other ends with the indentations opposite the locking gate. You may have to turn bObi's brushes slightly and apply light pressure until they fit into place.
Lower the rubber ends and replace the locking gate. Push down until it locks.
To clean bObi's side brush, use a Phillips head screwdriver to remove the screw holding her side brush in place.
Remove any dust and hair from both bObi's side brush and the socket where it is held.
Reinstall bObi's side brush by screwing it in place.