Welcome to bObsweep's Support Community!

Mingle, ask questions, and share ideas with your bObsweep family around the world.

New to the community? Start here.

Replacing and Cleaning Front Wheel - Bob PetHair Plus

Using a screwdriver for leverage, grip the front wheel firmly and pull it up.

You may remove and clean the smaller wheel on Bob's wheel piece. To detach it, grip firmly and pull.

Remove the 2 screws holding the wheel piece together with a Phillips head screwdriver.

Then pop the wheel piece open. After you’ve cleaned the inside of the wheel piece, replace the spring inside.

Insert the straight end of the spring into the square indent and hook the curved end of the spring underneath the tab.

front_wheel_spring.png

Hold the wheel piece together while you replace the 2 screws.

Replace the smaller wheel as well.

Lastly, place the front wheel back in its space on Bob and push down to lock the wheel in place.

Have more questions? Submit a request