Welcome to bObsweep's Support Community!

Mingle, ask questions, and share ideas with your bObsweep family around the world.

New to the community? Start here.

blOck Plus - Bob PetHair Plus

blOck Plus allows you to create digital barriers and keep Bob away from cords and off-limits areas. One barrier is emitted from blOck's left side, the other is emitted from blOck's front. You may use one or both barriers, depending on your preference.

Sync blOck Plus:

  1. Insert 4 AA batteries (not included).
  2. Press the button on the far left.
      • The power light on the left side of blOck Plus will turn on, stay still for 10 seconds, and then slowly blink every 3 seconds. This means the blOck’s left barrier is ON and ready to sync.
  3. Press the button in the center.
      • Now the power light on the front side of blOck Plus will turn on, stay still for 10 seconds, and then slowly blink every 3 seconds. This means the blOck’s front barrier is ON and ready to sync.
  4. Hold down the "Sync" button while at the same time flipping Bob’s power switch ON.

Turn blOck ON/OFF:

  • Left barrier:
        1. To turn on the left barrier, press the far left button. The power light on the left side will turn on.
        2. To turn off, press the far left button again. The power light will disappear.
  • Front barrier:
        1. To turn on the front barrier, press the center button. The power light on the left side will turn on.
        2. To turn off, press the center button again. The power light will disappear.
Have more questions? Submit a request