Welcome to bObsweep's Support Community!

Mingle, ask questions, and share ideas with your bObsweep family around the world.

New to the community? Start here.

Scheduling - Bob PetHair Plus

Bob can be programmed to start cleaning on the days of your choosing through his FullCommand remote.

To set Bob’s cleaning schedule, you must first set the current time and date on his remote. Bob operates on a 24-hour clock, so schedule accordingly. 

To set the current time and date:

  • Press the SET CURRENT TIME button. The first number will start flashing.

  • Use the FORWARD and BACK buttons to adjust the number. Press the RIGHT button to move on to the next number. Repeat for all numbers.

  • After the last number, "Sun" will begin blinking. Use the FORWARD and BACK buttons to select the current day.

  • When done, press the SET CURRENT TIME button again to save your settings.

After setting the current time and day on Bob’s remote, you may set his cleaning schedule.

To set the cleaning schedule:

  • Press the SET CLEANING SCHEDULE button. The first number will start flashing.

  • Use the FORWARD and BACK buttons to adjust the first number. Press the RIGHT button to move on to the next number. Repeat for all numbers.

  • After the last number, "Sun" will begin blinking. Use the FORWARD and BACK buttons to move between the days of the week, and press the OK/SYNC button to select or deselect cleaning for that day. You can select as many cleaning days as you want.

  • When done, press the SET CLEANING SCHEDULE button again to save your settings.

Bob’s remote keeps its programmed schedule for 4 hours after its batteries are removed.

When it is time for Bob to begin cleaning, he will leave his charging station and complete a full cleaning cycle before return to his station to replenish his battery.

Have more questions? Submit a request