Welcome to bObsweep's Support Community!

Mingle, ask questions, and share ideas with your bObsweep family around the world.

New to the community? Start here.

Deactivate Edge Sensors - Bob PetHair Plus

If you notice that Bob stops working on your carpet and displays that he feels “something funny going on" with his edge sensors, then you may need to deactivate them.

To deactivate Bob's edge sensors:

  1. Hold down the CHECKUP button on Bob’s cover. The 4 bars above “Check Up” will begin to flash on Bob’s screen.
  2. After the 4 bars flash 7 times and remain still, release the CHECKUP button.

While Bob's edge sensors are disabled, the 4 bars above "Check Up" will remain lit. Keep Bob away from stairs and sharp drops, as he will be unable to detect them while his sensors are deactivated.

To reactivate Bob’s edge sensors:

  1. Hold down the CHECKUP button on Bob’s cover once more. The 4 bars above “Check Up” will begin to flash on Bob’s screen.
  2. After the 4 bars stop flashing and disappear, release the CHECKUP button.

Have more questions? Submit a request